Jining Huayi Industry And Trade Co., Ltd.
Main products:Heat shrink products
Products
Contact Us
  • Contact Person : Ms. Yue Kitty
  • Company Name : Jining Huayi Industry And Trade Co., Ltd.
  • Tel : 86-537-2180032
  • Fax : 86-537-2586655
  • Address : Shandong,Jining City,Jiejia Road 03,Rencheng Economic Development,Jining City
  • Country/Region : China
  • Zip : 272000

pipeline epoxy paint

pipeline epoxy paint
Product Detailed
1.Oil,Gas,Water pipe joints 2.ISO9001 certified 3.High performance 4.Quick delivery,good service Epoxy PrimerDescription

EPOXY PRIMER is a specially formulated 100% volume solids (solvent less) two component epoxy. Typically used in a 3 layer coating system for superior corrosion protection of field welded joints of steel pipes or as an overcoat in multi-layer sleeve systems, this product provides the assurance that the pipe is fully protected and it will not be displaced and exposed to corrosive contaminants during the aligning & shrinking stages of the sleeve installation. 

Application

Have solvent surround oxygen coating have intensity to be heavy, solid content high, anticorrosion of good performance, construction process simple having numerous advantages such as environmental pollution. Apply to urban pipeline antiseptic, bury pipeline antiseptic mending mouthing, elbowing, in charge of body person who bury antiseptic serious antiseptic field of overhauling etc. of the pipeline extensively at present.

Recommended use:

Solvent Free High Tensile Epoxy Coating (HEC) is a kind of combined coating of Group A and Group B, and should be mixed according to certain proportion (A:B=100:20-25) which is adjustable according to the real environmental temperature and complete the coating according to the prescribed time (About 30 minutes). In the process, brush coating, roller coating, doctor coating and bicomponent airless spray coater can be employed. The proper depth of the steel tube surface anchor stripe is desired to be 50-70μ m. The Products will change from a liquid to a solid when the environmental temperature lower than 15°C. So you need make it liquid first, as by heating. ( the temperature of Product A≤35°C, the temperature of Product B≤30°C). 

Typical Product Properties  

NO. 

Item

Unit

Requirement

Test method

1

Adhesion

Level

≤2

ASTM D4541

4

Hardness

--

≥0.60

ASTM D2240

10

Hot ater Immersion 

24h

passed

SY/T0047

11

Chemical Medium corrosion Resistance

10%H 2 SO 4

72h

Nothing change

ASTM D543

10 % NaOH

72h

Nothing change

3 % NaCl

72h

Nothing change

12

Adhesion

Level

≤2

ASTM D4541

13

Negative peel

mm

≤10

ASTM D4541

14

Impingement intensity

J

≥12

Q/CD151

15

Resist curved

3.0 o

Coating nothing change

Q/CD151

16

Coating shear strength

Mpa

≥15

SY/T0041

17

Breakdown voltage intensity

MV/m

≥25

ASTM D149

18

Water Absorption

%

<0.1

ASTM D149

pipeline epoxy paint



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.